Basic Water Level Controller
Basic Water Level Controller
This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from Icon Systems Visual Indications : Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on. Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks. Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement.
- When tank is in reserve mode or empty it automatically starts the motors if water is present in the Sump tank.
- If water is present in the line it indicates the presence on the unit (Flow Indicator).
- It indicates water levels reaching in tank, which is helpful if there are open taps, blockage, leakage or damage in the pipeline connected to the upper head, ground or the desired storage tank.
- It green colored 2 level indications (half tank & full tank) of water in tank as well as 2 level indications (foot valve level & half tank) of sump tank.
- On motor symbol green colored indication for motor ON & red colored indication for dry run of motor.
- Has rocker switch to select Auto/manual operation.
